The One Control Mosquito Blender Trail adds a wet/dry control to any effects pedal or loop. It provides individual control over wet and dry signals, letting you fine tune your tone to absolute perfection! For example, if you love your clean amp sound but want just a tiny bit of grit in the signal, you can place your favourite overdrive pedal in the Mosquito Blender Trail's send/return loop and precisely blend in the desired amount of the effect. If you love to experiment with different sonic textures, this device is a must!
Activating the 'Trail' switch permits the signal from the 'Return' jack to continue to be mixed when the blender is bypassed — letting effects like reverb and delay decay naturally. You also get a 'Phase' switch, allowing you to mix effects of a different polarity without phasing out the sound. And lastly, One Control have incorporated their legendary BJF Buffer circuit (optional on/off) if you want to boost the clarity of your signal with some analogue goodness!
Controls
- DRY: Adjust the volume of the dry signal (input signal) from 0 to 100%.
- WET: Controls the volume of the wet signal (signal of the effect loop) from 0 to 100%.
- BJF Buffer: Toggles the buffer circuit on/off.
- TRAIL: Activates a trail feature. When set to on, the signal from the 'Return' jack continues to be mixed when the pedal is bypassed (and send signal is cut).
- PHASE: Reverses the polarity of the signal.
Specifications
- Power Requirements: 9V DC
- Current Draw: 12mA
- Size (W x D x H): 48 x 94 x 35 mm
- Weight: 230g
