Lehle Little Lehle III

£129.00

This is a New Lehle Little Lehle III from Lehle, listed in Specialist Effects Pedals on Just Pedals. Read More below.

View Just
more
and ,

Here's what Lehle say about the Little Lehle III:

The LITTLE LEHLE III – The universal Lehle switching and looping tool. The LITTLE LEHLE III allows you to remove effects pedals from your signal path at the press of a button.

A signal can be picked off at any point in the signal chain, for example allowing you to switch to an instrument tuner. The LITTLE LEHLE III can also be used to switch between two instruments with one amp or, vice versa, between two amps with one instrument. Extremely diverse sound sources are no problem. Signals from pickups, microphones and keyboard line-out sockets are routed loss-free to a target amplifier or recorder. All jack sockets are stereo, so you can re-route balanced signals too.

With the release of the LITTLE LEHLE III you can now combine mono and stereo signals. This will allow you to integrate an effects pedal with a mono input and stereo output into the signal path of the LITTLE LEHLE III without limitations. The LEHLE-Switch works with a microcontroller and an intelligent true bypass relay circuit with an active pop suppression function, thereby allowing the LITTLE LEHLE III to switch even faster than mechanical switches, noise free and without wear.

The easy-action mushroom-shaped button characteristic of LEHLE products is mounted in the cover so that your foot pressure is transmitted indirectly via a spring. Thus the circuit board is not exposed to mechanical loads, making the LITTLE LEHLE III virtually indestructible and guaranteeing years of trouble-free switching.

Not only is the stereo signal switched, but also the earth, – so say ‘goodbye’ to hum when switching between two amps, and selecting effect loops – it just can't happen anymore.

New for the LITTLE LEHLE III are the three operating modes, making the switch work as either a latching or momentary switch, allowing for short or rhythmic stutter-effects. The third mode combines a mixture of operating mode one and two: a short hit engages the latching function and a long hit is momentary.
Think of the creative potential. We take care of your signal so that you can take care of the music.

Key Features

  • True Bypass effects looper and AB switch
  • Hum-free and noiseless switching
  • Three different operating modes: Latching, Momentary or Mixed Mode
  • Mono and stereo functionality
  • Active pop suppression circuit

Related videos

Brand

Lehle

In the current JustPedals catalogue, Lehle is represented by Volume Pedals, Expression Pedals and Preamp & DI Pedals. Current listings include DC-Filter, P-Split III and Stereo Volume. That makes the range relevant to players looking for modelling, direct rigs and multi-effects. Check each model for its exact circuit or processing platform, controls, power requirements and connections, particularly where the catalogue includes both pedals and supporting gear.

Category

Specialist Effects Pedals

Specialist effects alter the signal in ways that do not sit cleanly inside one established family. They may use granular processing, frequency shifting, resonators, freeze or sustain, bit reduction, ring modulation, feedback networks or combinations of several techniques. The relevant distinction is the underlying process, its tracking or latency, and how completely the dry signal can be blended or replaced.

Tags

Stereo

Stereo products provide separate left and right audio paths, which may widen modulation, preserve independent delays or route a pedalboard into two amplifiers or a mixer. Input and output behaviour is not always symmetrical: some units sum a stereo input, while others create stereo from a mono source. Check whether the effect collapses safely to mono, how the dry signal is routed, the socket format and the destination’s panning and phase requirements.

True Bypass

True bypass removes the effect circuit from the audio path when bypassed, usually by mechanical, relay or switching circuitry. This can preserve the direct signal but does not automatically solve long-cable loading, and it may create a pop or leave no buffer for the rest of the board. Check the actual switching method, trails or spillover, input and output loading and the number of other true-bypass pedals in the chain.