Supro Analog Overdrive Pedal

£189.99

This is a New Supro Analog Overdrive Pedal from Supro, listed in Overdrive Pedals on Just Pedals. Read More below.

View Just
more
and ,

Here's what Supro say about the Analog Drive:

The Supro Drive captures the unmistakable sound of our vintage tube amplifiers in an effects pedal. By recreating every aspect of the circuitry of a 1960s Supro tube amp, including an actual output transformer, the Supro Drive achieves the magnetic saturation that gives Supro amps their iconic deep, warm, and gritty rock n' roll tones.

The most realistic-sounding overdrive pedal ever made, the Supro Drive features a toggle switch between the different windings of our custom transformer, offering high-headroom Bold sounds or high-gain Rich tones. The pedal also features an assignable Expression pedal control for adjusting gain with preset minimum and maximum settings. Runs on 9-18VDC.

KNOB-BY-KNOB

  • Volume: Sets the overall output volume
  • Gain: Sets the amount of preamp drive
  • Tone: Contours the tone of the drive
  • Transformer: Selects the winding ratio of the output transformer

CAPTURING THE SUPRO SOUND

Rather than approximating the sound of our amps using standard techniques, engineer Thomas Elliot created an all-new circuit which mimics every aspect of warm, Supro tube amp overdrive.

Specifications

  • POWER: 9-18VDC
  • CURRENT DRAW: 100mA
  • INPUT IMPEDANCE: 1M
  • OUTPUT IMPEDANCE: 150ohms

Brand

Supro

Category

Overdrive Pedals

Overdrive pedals use soft or hard clipping to add breakup, harmonic density and sustain while usually retaining more pick response than heavier distortion. A low-gain circuit can act as an always-on preamp or push an amplifier; a higher-gain design may supply its own compressed voice. Gain, tone, bass, presence, output and clipping options decide how the pedal stacks with other drives. The same pedal can sound open into a clean valve amp and congested into a saturated preamp, so judge it at the level and with the speakers it will actually meet.

Tags

Analogue

Uses continuous analogue circuitry for some or all of the audio path, so clipping, filtering or modulation arises from physical components rather than sampled algorithms. Check the exact signal path.

Presets

Stores complete groups of parameter values for later recall. The number of locations, switching time, spillover behaviour and whether presets include routing, expression and MIDI assignments determine how completely one sound can change into another.