Fryette FC-3E 2-Button Footswitch for GPDI-IR

♬Multifunctional：This Tap Switch Pedal can be used to connect to many kinds of Pedals, such as Delay. ♬TS Cable: 1/4"(6.35mm) TS jack, for connecting to the device you need to control. ♬One Momentary Switch: The soft-touch non-latching switch will bright great experience.This is a unlatch type switch, which means that the footswitch will stay on only when it’s pressed. ♬Full Metal shell: It is made of Aluminum alloy, lightweight and carriage. ♬Mini Size: We design this size to suitable for crowded Guitar Pedal Board.

Dual Channel ABY Switching: Offers flexible signal routing: select channel A, channel B, or mix both (Y mode) to split your guitar signal to 2 amps or combine 2 guitars into 1 amp. Clear Status Indicator: Features color-coded lights (Red for A, Green for B, Yellow for Y) to instantly show active channel status at a glance. Durable Mini Design: Compact aluminum alloy casing with a true-bypass footswitch, built to withstand gigging and travel while saving on your pedalboard. True Bypass Circuitry: Ensures zero signal loss or tone coloration when the pedal off, preserving your guitar’s natural sound. Universal Compatibility: Works with electric guitars, basses, and other line-level instruments; powered by a standard DC9V adapter (not included).

Function: For rewiring vintage padals or effect boxes. For unbuffered bypassing/true bypass of the effect circuit without coloring the tone of the instrument or other components in the signal chain. Quality Material: Made of high temperature plastic casing; High quality internal components. Good electrical conductivity and wear resistance, Electrical Life:50000 Cycles. Various Connection Methods: There are a total of nine lugs on each switch, three per pole. 3 poles allows true bypass as well as switching an light. You can also use this as a 2 pole switch just leave 3 of the pins disconnected. Easy Installation: Just need 7/8" depth and 1/2" diameter mounting hole are required. the threaded portion is 7/16" tall. very convenience. Widely Application: Use for Electro-Harmonix, T Rex,Retro FX,Radial Bigshot,ect effects pedals. Most commonly used in guitar effects pedals and audio equipment.

Function: For rewiring vintage padals or effect boxes. For unbuffered bypassing/true bypass of the effect circuit without coloring the tone of the instrument or other components in the signal chain. Quality Material: Made of high temperature plastic casing; High quality internal components. Good electrical conductivity and wear resistance, Electrical Life:50000 Cycles. Various Connection Methods: There are a total of nine lugs on each switch, three per pole. 3 poles allows true bypass as well as switching an light. You can also use this as a 2 pole switch just leave 3 of the pins disconnected. Easy Installation: Just need 7/8" depth and 1/2" diameter mounting hole are required. the threaded portion is 7/16" tall. very convenience. Widely Application: Use for Electro-Harmonix, T Rex,Retro FX,Radial Bigshot,ect effects pedals. Most commonly used in guitar effects pedals and audio equipment.

9 pin box Stomps for unbuffered bypassing / true bypass of the effect circuit without coloring the tone of the instrument or other components in the chain 3PDT switch for true bypass switching Widely used on Effect pedals and so other Music Equipments There are a total of nine Lug on each switch, three per poles This Stomps Push button also can be used as 2 poles, just leave 3 of pin disconnect