Strymon Ojai R30 Effects Pedal Power Supply

£179.99

This is a New Strymon Ojai R30 Effects Pedal Power Supply from Strymon, listed in Pedal Power Supplies on Just Pedals. Read More below.

View Just
more
and ,

Undoubtedly one of the most reliable bits of kit you could incorporate into your guitar pedal setup. The Strymon Ojai R30 is a versatile, future-proofed power supply from one of the most technologically advanced pedal manufacturers in the business.

Built to the highest standards with quality electronics, the R30 not only powers your pedals with trustworthy reliability, but also eliminates ground loop and AC line hum sounds for the cleanest tone.

Key Features

  • 5 Seperately Powered Sockets – 5 individual custom transformers (one per channel) deliver clean, consistent power.
  • 2 Switchable Sockets – Switch between 9V, 12V or 18V on two of the sockets to be able to power more hungry pedals.
  • Tour Without Power Constraints – Worldwide power compatibility ensures no-hassle international touring.
  • Fits Under Most Pedalboards – The R30 can be mounted under most pedalboards thanks to its low profile design.
  • Rugged, Stylish Design – Lightweight and rugged anodized midnight blue aluminum chassis.

Premium Variable Power

Run up to five guitar pedals on pure, isolated power eliminating ground loop and AC line hum. The Ojai uses premium analogue circuitry and components, ensuring reliable power wherever you are in the world – regardless of 120V, 240V, 100V or other voltage variations. Do your pedals require 9V, 12V or 18V? Strymon also have that covered with two switchable sockets.

Future Proof Expansion

As your pedalboard grows, your PSU needs to keep up. The Ojai contains a 24V thru jack to expand with another R30 unit or Strymon Zuma power supply. Integration into your current setup is simple. 

Fits Under Flat Pedaltrain Pedalboards

The Strymon Ojai R30 is a little bit thinner than the regular Strymon Ojai, and fits on the underside of flat Pedaltrain pedalboards such as the Pedaltrain Nano & Nano+. 

Specifications

Ins & Outs

  • 3 dedicated 9V outputs (500mA)
  • 2 adjustable outputs offer 9V (500mA), 12V (375mA), or 18V (250mA) DC options
  • 500mA per output powers nearly any pedal
  • 5 pedal cables included (5.5mm x 2.1mm barrel connectors, right angle to right angle, 18″ length)
  • 24V power adapter (PS-124), EIAJ-05 power adapter cable, and IEC cable included
  • 24V Thru jack allows connection to additional Strymon Ojai (sold separately)

Related videos

Brand

Strymon

In the current JustPedals catalogue, Strymon is represented by Delay Pedals, Reverb Pedals and Pedal Power Supplies. Current listings include Lex Rotary, TimeLine Delay and Olivera Oil Can Delay. That makes the range relevant to players looking for drive, gain and clipping, plus time-based effects and ambience. Check each model for its exact circuit or processing platform, controls, power requirements and connections, particularly where the catalogue includes both pedals and supporting gear.

Category

Pedal Power Supplies

Pedal power supplies distribute the correct voltage and current to effects while helping a board remain quiet and reliable. Isolated outputs can reduce shared-ground noise; higher-current outputs may be required by digital pedals, wireless systems and multi-effects units. Check polarity, connector size, available current, mains input, voltage options and whether outputs can be combined. A supply should be chosen from the actual current draw of every connected device, with sensible headroom for startup demand and future additions.

Tags

Analogue

Analogue products use continuous audio circuitry for some or all of the signal path, so clipping, filtering or modulation arises from physical components rather than sampled algorithms. The label does not guarantee a particular tone; component choice, headroom, bias, noise and the surrounding gain stages still matter. Check whether the switching, presets, control section or cabinet stage is digital when the exact signal path is important.

DIY Kit

Supplied as components and hardware to be assembled into a working pedal. Circuit complexity, board layout, enclosure preparation and off-board wiring set the difficulty, while accurate component values, polarity and solder joints determine the final noise, reliability and sound.