Electro Harmonix S8 Multi-Output Pedal Power Supply

To power Electro Harmonix, older DOD, and other pedals that require a positive tip Works with 9V 5.5mmx2.1mm negative center power supply, such as BOSS PSA Power supply. Convert 5.5mmx2.1mm to 3.5mm(1/8inch), As pictures 5mm (1/8inch) plug. Length: 12cm.

9v 500mA Regulated, 2.1mm x 5.5mm, Centre Negative Polarity Power Supply Filtered for Zero Hum, Noise Free Operation Spring Mounted Tip for Secure Connection 2 Meter Rounded Thick Cable. Energy Efficient Designed for Musical Equipment

To power Electro Harmonix, older DOD, and other pedals that require a positive tip Works with 9V 5.5mmx2.1mm negative center power supply, such as BOSS PSA Power supply. Convert 5.5mmx2.1mm to 3.5mm(1/8inch), As pictures . 5mm (1/8inch) plug. Length: 12cm.

♬10 Isolated DC Output : This Guitar Pedal Power Supply is with 10 separate output channels,including 6 ways 9V 100mA, 2 ways 9V 500mA, 1 way 12V 100mA and 1 way 18V 100mA. Direct Current makes power supply more stable while using. ♬Short-circuit And Overcurrent Protection: All 10 power output in this Effect Pedal Board Power Supply have separate short-circuit protection. Short circuit in one channel won’t affect other channel’s function. ♬Bright Blue Indicator: Turn on the switch of light, normally all lights would be on after the power is connected.Under the circumstance of all lights on, LED light of the short-circuit channel will be off, while lights in other normal channels are still on,which helps to locate the faults if there are short-circuit among the effectors. ♬Suitable for Guitar Effector: This effector power supply is with DC IN 18V and please be sure to use the power adapter we provided. And there are 10 power cables and 2 Polarity reversal cables in the package. ♬Silent … read more

JP-02 amplifier power supply has been well recognized by music lovers all over the world. Each of its circuits has independent short-circuit protection and independent short-circuit protection indicator. Even if any one of the roads is short-circuited, other branches can work normally. With a user-friendly LED control switch design, the LED array illuminates all effects on the board. 7-channel 9V100mA output, 1 channel 9V500mA output and 12V, 18V output each, to meet the power supply requirements of any different effects. In the JP-02 power supply part, we use the high-current output step-down switching type integrated voltage regulator circuit produced by National Semiconductor Corporation. The chip has good protection circuit, including current limit and thermal shutdown circuit. The peripheral components form a high-efficiency voltage regulator circuit. Features low-noise, high-performance and peripheral-simplified switching, the power adapter fully meets the six-level energy effici… read more