Tubesteader MAGNEZIUM Dual Channel Tube Preamp Pedal

£339.00

This is the Tubesteader MAGNEZIUM Dual Channel Tube Preamp Pedal from Tubesteader, listed in Preamp & DI Pedals on Just Pedals. Read More below.

View Just
more
and ,

MAGNEZIUM is a two-channel preamp inspired by the sound of the highly-coveted “Magna” Super 59 amp. It combines Fender’s “tearing silk” and Marshall’s “clank” overdrive tones in one pedal, giving you the best of both worlds!

Key Features

  • All 12X7 Power – It’s equipped with a pair of 12X7 tubes operating at full 250VDC
  • True Bypass – With true bypass, you can be sure your signal will be clean when the pedal is not in use.

MAGNEZIUM features two fully independent channels – for low and high gain – and has an option of external switching between them via the 1/8″ side-mounted jack.

The low-gain channel delivers a rich bottom end with Bassman-style overdrive, while the high-gain channel adds a Marshall-style gain stage at the front of the circuit. Perfect for classic Southern rock sounds. Cranking the gain past noon will take you firmly into harmonically rich ZZ Top-riffing territory.

A toggle switch on the side of the preamp offers two output modes: a higher output for direct connection to a power amp or a cab sim and an attenuated mode with a treble cut for connection to the front of an amp.

The MAGNEZIUM has an all-tube signal path and true-bypass switching. – all converted from a standard 12VDC input.

Brand

Tubesteader

Category

Preamp & DI Pedals

A preamp brings an instrument signal to a controlled level and shapes its impedance, gain and frequency balance before amplification or recording. A DI converts the signal for a balanced, low-impedance connection and may include ground lift, pad and transformer isolation. Combined units can add drive, cabinet filtering, effects loops and parallel outputs while keeping the direct path stable.

Tags

Cab Simulator

Recreates the strong frequency filtering and resonance imposed by a loudspeaker cabinet and its microphone. It removes the harsh, extended high end of an unfiltered preamp signal and may offer cabinet size, speaker, microphone, position and room choices.

True Bypass

Connects input directly to output through mechanical or relay switching when the effect is off, removing the active circuit from the audio path. It avoids buffer colour but leaves cable capacitance and switching design to influence high-frequency loss and possible switching noise.