FLAMMA FC07 Overdrive Pedal Guitar Electric Guitar Overdrive Effects Pedal Hot Warm Modes True Bypass with Power Supply

Original price was: £35.92.Current price is: £27.71.

This is a New FLAMMA FC07 Overdrive Pedal Guitar Electric Guitar Overdrive Effects Pedal Hot Warm Modes True Bypass with Power Supply from Flamma its found in our Pedal Power Supplies on the Just Pedals menu. Read More below.

View Just
more
and ,

The Flamma is a pedal power-supply product. It is intended for powering compatible pedalboard equipment.

Key identified features include true-bypass switching and overdrive.

  • Brand: Flamma
  • Product type: Pedal Power Supplies
  • Features: True Bypass, Overdrive

Related videos

Brand

Flamma

In the current JustPedals catalogue, Flamma is represented by Multi-Effects Pedals, Looper Pedals and Delay Pedals. Current listings include FC01 Drum Looper, FX100 Multi Processor and FX10 Headphone Amplifier Headphone Amp Portable Plug. That makes the range relevant to players looking for drive, gain and clipping, plus time-based effects and ambience. Check each model for its exact circuit or processing platform, controls, power requirements and connections, particularly where the catalogue includes both pedals and supporting gear.

Category

Pedal Power Supplies

A pedal power supply converts mains or battery power into the regulated DC outputs required by an effects board. True isolated outputs break ground paths and reduce interaction between pedals, while daisy chains share a common supply. Each output must match voltage, polarity and current demand; switchable voltages, high-current sockets, IEC or external adapters and mounting dimensions affect compatibility.

Tags

Overdrive

Uses moderate clipping and gain-dependent compression to add harmonics while retaining much of the original note contour. Bass filtering, mid emphasis, clipping symmetry and available headroom decide whether it sounds open and amplifier-like, tightly focused or heavily saturated.

True Bypass

Connects input directly to output through mechanical or relay switching when the effect is off, removing the active circuit from the audio path. It avoids buffer colour but leaves cable capacitance and switching design to influence high-frequency loss and possible switching noise.