Just Video – Can I Get 5 Iconic Overdrive Pedals From an EQ Pedal and an OD-3?

【15 Effects】 All kinds of effects can coexist, namely AMP(gain effect), MOD (modulation effect), HAM (harmonic effect), NOG (noise gate), EQ (7-stage equilibrium), ECHO (echo), REV (reverberation), among which AMP is divided into clean(silent sound), acous(acoustic sound), OD(overdrive), dist (distortion),metal (metal). MOD is divided into five effects: cho(chorus), fla(flange), pha(Phase), vib (vibrato), wah(wah) 【16 User Preset Modes】 16 user modes preset for saving your favorite settings 【Guitar Pedal Rechargeable】Come with USB cable 【True Bypass】 Reduce signal loss

The drive step pin can be used to activate or deactivate the overload function. Long press this key to activate or deactivate the noise gate function. There are XLR DI output interface, 3.5mm auxiliary audio interface and 3.5mm headphone monitor output interface on the left side of the effector. There is a 6.35mm mono input interface, a 6.35mm output interface and a 6.35mm dry signal output interface. You can use the pre/post switch to select DI (XLR DI out interface on the left). The output signal requires the unprocessed dry signal (front) or the wet signal processed by this effector (rear). You can use the boost/GND switch to select the ground control to eliminate ground ring noise. The output shift switch is used to select whether to close the box simulation function of the output interface (rear output interface). On the operation panel, you can use the DI Wave switch to choose whether to close the box simulation function of the DI out interface (left XLR output interface) and the… read more