Cioks 4030 Flex 4 5.5/2.5mm Centre Positive 30cm DC Plug

£3.99

This is a New Cioks 4030 Flex 4 5.5/2.5mm Centre Positive 30cm DC Plug from Cioks, listed in Specialist Effects Pedals on Just Pedals. Read More below.

View Just
more
and ,

Here's what Cioks say about the 4030 Flex 4:

Type 4 Flex cables are green and fitted with a centre positive 5,5/2,5mm DC plug. This Flex cable type is nowdays mainly used to power all Eventide Factor and H9 pedals and is widely used for many AC pedals. This Flex cable is available with angled (L-shaped) plug in three lengths 30, 50 or 80cm.

The applications we know are the following pedals:

  • All Eventide Factor and H9 pedals
  • Big older 4-button modeling Line 6 pedals (DL4, DM4, MM4, AM4 and FM4)
  • Older Electro-Harmonix pedals which need 18, 24 or 40V
  • DigiTech Whammy (the first original and 4th edition) *
  • DigiTech Talker, original JamMan *
  • DigiTech JamMan stereo original ones, later versions are DC and for type 1 Flex (BOSS standard) *
  • DigiTech Delay, TimeBender, HarmonyMan, Expression Factory, Space Station *
  • VoodooLab Control Switcher
  • M9 and M13 modelers from Line 6
  • Boomerang Phrase Sampler or Chorus Delay
  • FoxRox Captain Coconut
  • Rocktron All Access MIDI controller
  • Many pedals from say H&K, Mesa Boogie, Yamaha which should be powered with AC *

*For AC pedals polarity doesn’t matter! There’s nothing like a DC or AC cable. Power cables just have a negative or positive polarity which in case of alternating current doesn’t matter. If your black Flex cable doesn’t fit into your AC pedal’s socket you should use the green one which is for the larger 2,5mm pin. Minimum one green Flex cable is included with all our power supplies except the Adam link. You can also get a yellow type 3 Flex cable for your AC pedal and have the green ones to power your Eventides.

Related videos

Brand

Cioks

In the current JustPedals catalogue, Cioks is represented by Pedal Power Supplies and Boost Pedals. Current listings include The Grip Bracket, L2450 DC Link Cable and L2415 DC Link Cable. That makes the range relevant to players looking for drive, gain and clipping, plus pedalboard infrastructure and control. Check each model for its exact circuit or processing platform, controls, power requirements and connections, particularly where the catalogue includes both pedals and supporting gear.

Category

Specialist Effects Pedals

Specialist effects alter the signal in ways that do not sit cleanly inside one established family. They may use granular processing, frequency shifting, resonators, freeze or sustain, bit reduction, ring modulation, feedback networks or combinations of several techniques. The relevant distinction is the underlying process, its tracking or latency, and how completely the dry signal can be blended or replaced.

Tags

MIDI

MIDI sends, receives or responds to Musical Instrument Digital Interface messages rather than carrying instrument audio itself. Program changes can recall presets, continuous controllers can move parameters and MIDI clock or transport messages can synchronise timing. Check the connector or USB method, channel and message support, clock direction, latency and whether the device needs a separate MIDI host or adapter. MIDI control is powerful, but compatibility depends on the exact messages each product understands.

Stereo

Stereo products provide separate left and right audio paths, which may widen modulation, preserve independent delays or route a pedalboard into two amplifiers or a mixer. Input and output behaviour is not always symmetrical: some units sum a stereo input, while others create stereo from a mono source. Check whether the effect collapses safely to mono, how the dry signal is routed, the socket format and the destination’s panning and phase requirements.