Brand

Caline

Caline’s official catalogue spans guitar and bass effects, acoustic preamps, amplifiers, pedalboards and pedal power supplies. The JustPedals listings reflect that breadth: the CP-40 is an acoustic-guitar preamp, the CP-45 is a bass compressor, and the CP-05 is a multi-output power supply for effects pedals. Caline is therefore represented by both tone-shaping products and practical board equipment. Compare the CP model number and stated function before choosing; a power supply or preamp serves a different role from an overdrive, delay or modulation pedal.

Tags

Build your own Pedal

Build-your-own pedal products are intended for assembly rather than immediate plug-and-play use. The project may involve soldering a circuit board, wiring jacks and switches, drilling or finishing an enclosure and testing for noise or shorts. Difficulty depends on the instructions and how much is pre-populated. Check the parts list, tools, expected voltage, enclosure work and skill level before starting, and allow time for troubleshooting rather than treating the kit as a finished pedal.

Delay

Creates one or more time-separated copies of the signal. Delay time sets their spacing, feedback determines how many repeats continue, and filtering, modulation or saturation decides whether successive echoes remain clean, darken, wobble or break apart.

Distortion

Clips the waveform firmly and adds a dense series of harmonics with compression and sustain. The clipping devices, gain stages and tone filters determine whether the result is tight, smooth, mid-focused, scooped, grainy or deliberately abrasive.

Effect Pedal Kit

Effect pedal kits provide a set of parts for building an effects unit, often including a circuit board, components, enclosure or hardware. They can be a useful way to learn how clipping, filtering, gain and switching are implemented, but the required work varies from guided assembly to a full wiring and enclosure project. Read the build notes, check the expected voltage and make sure the kit includes the parts and tools needed for the intended finish.