Brand

Sonicake

Sonicake is a Changsha, Hunan gear maker with a catalogue spanning compact effects, multi-effects processors, bass and acoustic preamps, headphone tools and accessories. Its official FAQ says its products are manufactured and packaged in Changsha. The JustPedals selection reflects that mix: the QEP-10 FlipWah combines wah and volume functions, the QME-20 Smart Box is a multi-effects processor, and listings also include adapters and headphone amplifiers. Check whether a Sonicake listing is a pedal, processor or supporting accessory before comparing it with a conventional single-effect stompbox.

Category

Amp & Cab Sims

Amp and cab simulator pedals recreate the gain, frequency response and feel of an amplifier and speaker cabinet in a pedalboard-friendly format. They can feed an effects return, power amp, mixer, interface or headphones, depending on the model. Check whether cabinet filtering or impulse responses are built in, whether they can be bypassed, and whether the output is intended for a real guitar cabinet or a direct system. Gain staging remains important when combining them with other drives.

Chorus Pedals

Chorus mixes the dry signal with one or more short, continuously modulated delays. The small pitch and timing movement between the paths creates width, shimmer and the impression of several instruments playing together. Rate controls the modulation speed, depth controls its excursion, and delay or mix settings determine whether the result is subtle thickening, a liquid wobble or a broad stereo image.

Distortion Pedals

Distortion clips the waveform more firmly than overdrive, generating dense upper harmonics, longer sustain and a more compressed response. Circuit topology and filtering decide whether the sound is tight and focused, broad and aggressive, smooth or deliberately abrasive. Gain sets the amount of clipping, while pre- and post-distortion tone controls strongly influence low-end definition, midrange presence and high-frequency texture.

Tags

Cab Sim

Cab Sim is shorthand for cabinet simulation: speaker and cabinet filtering applied to a direct signal so it behaves more like a miked guitar cabinet. It can make a preamp or amp pedal usable into an interface, mixer, PA or headphones, but the correct routing varies. Check whether the cab stage can be bypassed, whether impulse responses are supported, which outputs carry the filter and how the unit should connect to a real power amp or cabinet.

Chorus

Adds one or more slightly delayed voices whose delay time is continuously modulated. Their small pitch and timing differences thicken the source and create shimmer or stereo width; modulation rate, depth, base delay and mix determine how subtle or liquid the movement becomes.

Delay

Creates one or more time-separated copies of the signal. Delay time sets their spacing, feedback determines how many repeats continue, and filtering, modulation or saturation decides whether successive echoes remain clean, darken, wobble or break apart.

Distortion

Clips the waveform firmly and adds a dense series of harmonics with compression and sustain. The clipping devices, gain stages and tone filters determine whether the result is tight, smooth, mid-focused, scooped, grainy or deliberately abrasive.

multi effects

Multi-effects products combine several processing blocks, such as drive, modulation, delay, reverb, pitch and amp modelling, in one unit. The available effects list is only part of the decision: compare simultaneous blocks, signal path, preset and scene recall, footswitch assignments, expression, MIDI, USB, latency and direct outputs. A compact unit can suit travel or backup, while a larger model may act as the centre of a complete amplifier or recording setup.

Reverb

Builds a dense tail of reflections around the original sound. Early reflections establish apparent distance and size, while decay, diffusion, damping and modulation shape the density, brightness and movement of the later field. Pre-delay separates the dry attack from the ambience, and mix controls their relative level.