TC Electronic AmpWorx Vintage Series Combo Deluxe 65′ Preamp Pedal

£119.00

This is a New TC Electronic AmpWorx Vintage Series Combo Deluxe 65′ Preamp Pedal from TC Electronic, listed in Preamp & DI Pedals on Just Pedals. Read More below.

View Just
more
and ,

The TC Electronic AmpWorx Vintage Series Combo Deluxe 65' is a twin-channel guitar preamp pedal. It faithfully recreates the sound of a legendary mid-'60s Fender tube amplifier, but in a convenient and compact stompbox with independent channel controls, built-in digital spring reverb, official Celestion cab sim IR, and dedicated DI/headphone outputs.

The original valve amp that the Combo Deluxe 65' pedal is based on ranks among some of the world's most highly sought-after vintage combos, and is likely one of the most recorded amps in music history — and for good reason. It sounds amazing! But it's rare, and if you find one, it likely comes with a hefty price tag. However, you can now get your hands — and feet — on this iconic guitar tone at a much friendlier cost, and in a far more practical package to boot!

Key Features

  • Faithfully emulates the tone, touch and feel of a 1965 Blackface Reverb Deluxe tube amp.
  • Two channels with independent gain, volume and EQ controls for all-American vintage tone. 'Green' mode indicates the normal clean channel, while the 'Red' mode offers more gain and a slightly different voicing.
  • Equipped with a built-in, foot-switchable 4-second convolution spring reverb — taken directly from an original Blackface Deluxe GIBBS reverberation unit spring tank. Includes adjustable, set-it-and-forget-it 'Reverb Tone' control on the back panel.
  • Added 'Middle control modification based on the middle knob of a Blackface Twin Reverb amplifier.
  • A thoughtful 'Bright' switch mod (on the rear panel) will give you a sonic edge when you need it the most, letting you cut through the mix with ease.
  • Dedicated DI output, equipped with an official Celestion 12" G12M Creamback cab sim IR, turns your pedalboard into a gig-ready rig that you can plug directly into PA system or audio interface for recording.
  • Headphone output equipped with the very same Celestion cab sim IR, for huge tube amp tones straight to your ears. No more annoying the neighbours!
  • An optional bypass mode can be activated by pressing the 'Reverb' and 'Channel' footswitches at the same time. This allows you to punch the pedal in whenever you want, if you're using it like a standard stompbox into a guitar amp.
  • Groundbreaking TC AmpWorx modelling technology provides low-latency, huge dynamic range and feels just like the real deal.
  • Perfect, pedalboard-friendly pedal platform takes overdrives like a champ!
  • Designed and engineered in Denmark.

Specifications

  • Voltage: 9V
  • Current Draw: 300mA
  • Dimensions (W x D x H): 11.3 x 13.6 x 5.1 cm
  • Weight: 0.53 kg

Related videos

Brand

TC Electronic

In the current JustPedals catalogue, TC Electronic is represented by Delay Pedals, Reverb Pedals and Looper Pedals. Current listings include DC30 Preamp, Plethora X1 and V550 Pre-Amp. That makes the range relevant to players looking for drive, gain and clipping, plus time-based effects and ambience. Check each model for its exact circuit or processing platform, controls, power requirements and connections, particularly where the catalogue includes both pedals and supporting gear.

Category

Preamp & DI Pedals

Preamp and DI pedals shape an instrument signal and can feed a mixer, interface, PA, recorder or amplifier with a more controlled level and impedance. They may add EQ, gain, cabinet simulation, balanced output, ground lift or instrument-specific voicing. A bass, acoustic or electric-guitar preamp can solve very different problems, so check the input headroom, output format, phantom-power behaviour and routing. Decide whether the pedal should drive an amp, replace one for direct use or perform both roles.

Tags

Cab Simulator

Cabinet simulator products apply speaker and cabinet filtering, often from an impulse response or modelled curve, to make a direct signal behave more like a miked cabinet. They are useful after an amp or preamp into an interface, mixer or headphones. File format, sample rate, memory, microphone options, bypass routing and stereo support vary, so check those details before sending the signal to a real guitar cabinet or a full-range monitoring system.

Digital

Digital products use conversion and processing to create, store or control the effect. This can provide presets, complex routing, repeatable algorithms, USB, MIDI and firmware features, but conversion, latency, power requirements and clocking depend on the design. Check the input and output levels, sample or impulse-response support, bypass behaviour and current draw when combining a digital unit with analogue pedals or a direct recording setup.