Radial JR1-M Remote Momentary Footswitch

SPST Momentary Foot Switch, Normally Open Operation, OFF-(ON) 2 pin. Solder Lug, 12mm mounting hole size.Rating: 4A 125VAC, 2A 250VAC Soft Touch Switch(No Click Sound when press down), It's silent operation, very easy to press and durable. The Push button footswitch is easy to depress and quiet. Makes a great upgrade to any existing guitar effect pedal or project. This single pole single throw normally open momentary foot switch is perfect for tap tempos, feedback loops, relays, and anywhere you want the option for a constant or fast foot tap.

Contact Configuration: DPDT Switch Operation: On-(On) Panel Cut-Out: 12mm Contact Rating: 2A 250VAC, 4A 125VAC Terminal Type: Solder

Material: Plastic, Voltage: 250VAC 5A; Live cycle: 100,000 switching cycles, cable length: 12cm. Momentary types turn on the pedal, press down to power up, and lift the foot to turn it off. The underside of the non-slip plastic pad area is large, it is not easy to slide and do not tilt sideways if the operation of the switch reduces foot fatigue. Foot pedal switch, hands-free operation for controlling various power tools, suitable for drilling machine, lamps, table milling machines and roll saws etc. Good workmanship, short-term snap design can help you to save a lot of energy.

Ultra-compact and lightweight pedal controller with two foot switches Current foot switch design for this dual foot switch pedal Great external foot switch for Ampero II guitar effects pedal and other multi effects pedal or digital devices TRS cable (80 cm) included with this Momentary Dual Footswitch Foot Controller No power supply is required for this dual footswitch pedal

Function: For rewiring vintage padals or effect boxes. For unbuffered bypassing/true bypass of the effect circuit without coloring the tone of the instrument or other components in the signal chain. Quality Material: Made of high temperature plastic casing; High quality internal components. Good electrical conductivity and wear resistance, Electrical Life:50000 Cycles. Various Connection Methods: There are a total of nine lugs on each switch, three per pole. 3 poles allows true bypass as well as switching an light. You can also use this as a 2 pole switch just leave 3 of the pins disconnected. Easy Installation: Just need 7/8" depth and 1/2" diameter mounting hole are required. the threaded portion is 7/16" tall. very convenience. Widely Application: Use for Electro-Harmonix, T Rex,Retro FX,Radial Bigshot,ect effects pedals. Most commonly used in guitar effects pedals and audio equipment.