did somebody say just Tweak?

        • Product categories

Old Blood Noise Endeavors EQ and Buffer – New Old Blood Noise Endeavors Guitar Effect Pedal

£119.00

The Old Blood Noise Endeavors EQ and Buffer is an always on buffer with a switchable three-band EQ. The Buffer is perfect for long cable setups or crowded pedalboards eliminating signal loss caused by these long cable runs. The EQ allows players to tailor the frequency to a specific part. Its roadworthy chassis is ideal…

When you click on “Add to Basket” or “More Details,” you’ll be taken to a partner website where you can find additional information about this product. As an affiliate, we may receive a small commission for this, but it won’t cost you anything extra.

View more pedals made by:
View all pedals of the type : effect pedals

Description

The Old Blood Noise Endeavors EQ and Buffer is in New condition and made by Old Blood Noise Endeavors , it is a great Buffer and EQ Endeavors Noise Blood Old Guitar Effect Pedal- The Old Blood Noise Endeavors EQ and Buffer is an always on buffer with a switchable three-band EQ. The Buffer is perfect for long cable setups or crowded pedalboards eliminating signal loss caused by these long cable runs. The EQ allows players to tailor the frequency to a specific part. Its roadworthy chassis is ideal for the gigging musician and its compact size will fit on most pedalboards. . Available from Just Pedals for only £ 119 Superb tone The EQ and Buffer pedal from Old Blood Noise Endeavors is the perfect solution for players who have an overabundance of pedals or long cable setups. The buffer is always on and maintains the clarity of your tone for a smooth performance. The EQ is ideal in tailoring frequencies to specific parts and can be activated via the stomp switch. EQ built with guitarists in mind The OBNE EQ + Buffers EQ section is ideal for tweaking guitar tones. It features three tactile faders each offering powerful boost and cut for a specifically chosen frequency range. The Low fader employs a low shelf to equally increase or decrease the volume of everything below 100 Hz while the High fader does the same for everything above 2 KHz. The Mid control uses a bell curve fixed at 500 Hz – ideal for dialing in the amount of note in your tone. Features An always on buffer with switchable three-band EQ Perfect for long cable setups or crowded pedalboards Maintains the clarity of your tone for a smooth performance Ideal for tailoring frequencies to specific parts Roadworthy chassis is perfect for gigging musicians Simple design with three-fader layout Powered by a 9V DC Adapter (Sold Separately) LED Indicator allows easy visibility in poor lighting conditionsSpecifications Product Code: OBNE EQ + BUFFER Controls: 3 x Faders (Low Mid High) Power Requirement: 9v DC

Reviews

There are no reviews yet.

Be the first to review “Old Blood Noise Endeavors EQ and Buffer – New Old Blood Noise Endeavors Guitar Effect Pedal”

Your email address will not be published. Required fields are marked *

About Old Blood Noise Endeavors

We have one of the largest online selection of new and used Old Blood Noise Endeavors music gear. If you are looking for your next pedal, we will have it online at JustPedals with fast delivery direct to you at home. Every item on the JustPedal menu is delivered by sellers to all areas of the USA & UK.

Buffer

A buffer pedal is used to preserve the quality and integrity of a guitar’s signal as it travels through a pedalboard. Its primary function is to maintain the signal strength and tonal clarity, especially in setups with multiple effects pedals and long cable runs.

When a guitar signal passes through a series of effects pedals and long cables, it can experience signal degradation, resulting in a loss of high frequencies, reduced clarity, and increased noise.

A buffer pedal addresses this issue by using active circuitry to “buffer” or isolate the guitar signal from the effects chain.

This helps to prevent signal loss and tonal degradation, ensuring that the signal remains strong and clear throughout the entire signal path.

Buffer pedals are especially useful in complex pedalboards where multiple pedals and long cables can otherwise negatively impact the guitar’s tone.

EQ

While Ed Sheeran primarily relies on the natural sound of his acoustic guitar and vocals, he occasionally uses EQ (Equalization) to shape and enhance his tone during live performances or in the studio. EQ pedals or onboard preamps can allow him to adjust the frequency response of his guitar signal to suit the acoustics of different venues or to achieve specific tonal characteristics. Here’s how EQ might be utilized in Ed Sheeran’s setup:

1. **Tonal Shaping**: EQ can be used to adjust the balance of frequencies in the guitar signal, allowing Ed Sheeran to shape his tone to his liking. For example, he might boost the midrange frequencies to bring out the warmth and presence of his acoustic guitar, or cut certain frequencies to reduce any harshness or mud in the sound.

2. **Feedback Control**: In a live setting, EQ can help control feedback by notching out problematic frequencies that might cause the guitar signal to feed back through the amplification system. This can be particularly useful when performing in venues with challenging acoustics or high volume levels.

3. **Room Correction**: In situations where the venue’s acoustics are less than ideal, EQ can be used to compensate for any deficiencies in the sound. By adjusting the EQ settings, Ed Sheeran can tailor the guitar tone to sound more balanced and natural, regardless of the room’s acoustic properties.

4. **Matching Gear**: EQ can also be used to match the tone of Ed Sheeran’s guitar to the sound of other instruments or equipment in his setup. For example, he might adjust the EQ to complement the tonal characteristics of his vocal microphone or to blend seamlessly with backing tracks or other instruments.

Overall, while EQ may not be a central component of Ed Sheeran’s guitar effects setup, it can still play a valuable role in shaping his tone and ensuring that he achieves the desired sound in different performance environments. Whether used subtly for tonal shaping or more aggressively for feedback control, EQ allows Ed Sheeran to tailor his guitar tone to suit his musical vision and performance needs.

Guitar Effect Pedal

A guitar pedal, also known as an effects pedal, is a device used by guitarists to alter the sound of their instrument in various ways. These pedals are typically small, foot-operated units that are connected in a signal chain between the guitar and the amplifier. They can modify the guitar’s tone, pitch, and dynamics by applying different effects such as distortion, reverb, delay, chorus, and more. Guitar pedals come in both analog and digital formats, and they allow musicians to create a wide range of sounds, enhancing their musical expression and creativity. They are essential tools for guitarists in genres ranging from rock and blues to jazz and electronic music.

New

Just New products for sale, unused, and in their original packaging. They come with a protected seller guarantee and include manufacturer warranties. Read more for additional details.

Noise

Available for Amazon Prime