Description

The LD Systems FX 300 Vocal Effects Pedal is in New condition and made by LD Systems , it is a great EQ Guitar Effect Pedal- The LD Systems FX 300 Vocal Effects Pedal is everything you need for superior sound – All in one convenient unit. The LD Systems FX 300 is the ideal solution for vocalists and instrumentalists looking to take their sound to the next level. With a plethora of 16-bit quality digital effects combined with intuitive mixing capabilities you can sculpt your sound in seconds. Use both dynamic and condenser microphones with the phantom power-equipped microphone channel and plug your instrument into the low-noise high-impedance instrument channel. Dial in the gain sculpt the tone and set your desired FX level for each channel. And use the two handy pedals (Mute All and FX Mute) for hands-free muting and unmuting at any time. Youre always in control. . Available from Just Pedals for only £ 128 FX that go further The LD Systems FX 300 Vocal Effects is a Pedal allows you to express yourself with clarity. Loaded with 16 powerful presets the FX 300s high-quality digital effects are the perfect way to take your sound to the next level. These potent possibilities are in 16-bit quality and give you everything from reverbs and delays to hypnotic chorus and unique combinations. And no matter which preset youre using the handy FX Mute pedal gives you instant hands-free control over switching your effects on and off. Mix it up The LD Systems FX 300 Vocal Effects Pedal is more than an effects processor. This powerful device also functions as a powerful and intuitive 2-channel mixer. Boasting dedicated channels for microphones and instruments you can optimise your sound with ease. The microphone channel features an input thats capable of accommodating both dynamic and condenser microphones thanks to switchable +48V phantom power. You can plug in via XLR or 1/4 connectors thanks to the XLR-1/4 combo connector. Theres also a handy high-pass filter available so you can remove any unwanted low-frequency content from your microphone signal. Perfect for preventing that detrimental mud from having too many bass and low-mid sounds in your overall mix. Then theres your instrument channel. With a low-noise instrument input with a high-impedance design its ideal for acoustic guitars bass guitars and other instruments too. You can enjoy plenty of headroom so you dont have to worry about your signals becoming distorted. This channel also features an additional FX loop so you can implement your own effects with ease. Each channel features dedicated controls for FX Send Gain and Tone so you can fine-tune your sound with ease directly from the front panel. Your effect preset can be selected by the 16-section rotary control on the right whilst the overall output can be set with the Mix Out control below it. And if you want to completely mute your signal simply hit the second pedal labelled Mute All. Its as easy as that. Complete with convenient signal indicators and the potential to provide up to 5 hours of operation when using a 9V battery (can also be powered by an external 9V PSU batteries and PSU not included) you can perform with confidence night after night. Specifications System Channels: 2 Operating Voltage: External mains adapter 9VDC 250mA (not included) Dimensions: 160mm x 55mm x 163mm (W x H x L) Weight: 0.65kg Product Code: LDFX300 Microphone Channel Inputs: 1 x XLR/6.3mm jack Frequency Response: 50Hz – 20kHz XLR Input Amplification Range: 42dB Mono Mic Input THD-N: Less than 0.03-percent XLR Impedance: 6000 Ohms Phantom Power: +48VDC to XLR input Input Type: Electronically-balanced Jack Input Amplification Range: 20dB Jack Input THD: Less than 0.045-percent Microphone EQ: +5/-8dB at 8kHz Channel Controls: FX Send Gain Tone Channel Display Elements: Channel Signal Instrument Channel Inputs: 1 Gain Range: 23dB THD: 0.03-percent EQ: +7/-8dB at 10kHz Channel Inserts: 1 Channel Controls: Artist Pedal FX Send Gain Tone Indicators: 3-Colour LED (SIG) Channel Signal Main Section Line Outputs: 2 x 6.3mm TRS XLR XLR Output: +17dBu max. output level (balanced) 150 Ohm impedance Jack Output: +5dBV max. output level (unbalanced) 40 Ohm impedance Digital Effects Processor: Yes Number of Presets: 16 Main Section Controls: DFX Presets FX Mute Mix Out Mute All Power Display Elements: Effect-Clip FX Mute Mute All Red LED (FX CLIP)