MXR TBM1 Tom Morello Power 50 Overdrive Pedal – New MXR Looper Overdrive Guitar Effect Pedal
£164.96
The MXR TBM1 Tom Morello Power 50 Overdrive allows you to capture over 30 years of Tom Morello innovation within a single pedal. Reproduce the sound of an entire amp set up within seconds for a massive clean and controlled distorted tone. The Power 50 guarantees an overdrive that will cut straight through the mix…
When you click on “Add to Basket” or “More Details,” you’ll be taken to a partner website where you can find additional information about this product. As an affiliate, we may receive a small commission for this, but it won’t cost you anything extra.
The MXR TBM1 Tom Morello Power 50 Overdrive Pedal is in New condition and made by MXR , it is a great Looper Overdrive Guitar Effect Pedal – The MXR TBM1 Tom Morello Power 50 Overdrive allows you to capture over 30 years of Tom Morello innovation within a single pedal. Reproduce the sound of an entire amp set up within seconds for a massive clean and controlled distorted tone. The Power 50 guarantees an overdrive that will cut straight through the mix when playing lead as well as thickening it out when playing on the lower end. Fitted with an array of control settings the FX loop feature can be used to redefine the sound of your rig while the Gain Bass Middle Treble Volume and Presence knobs enable you to interpret Morellos signature overdriven sound in your own way. . Available from Just Pedals for only £ 164.96 Full Description The power of an amp beneath your feet Harness decades of creative trial and error to capture the unique tone of an entire custom stack. Whatever your set up the Power 50 Overdrive can add a whole new flavour to your sound through MOSFET technology that helps duplicate the big gritty tones of a much larger rig. For the ultimate Tom Morello effect pair with the Cry Baby Wah pedal for a glorious Wah overdrive tone. Using the two in harmony is likely to create a slightly more subdued Wah effect when you run the Power 50 first. Running the Cry Baby first however will give a sharp high-end response to the toe-down position. Bring your chain full circle with the loop feature If you were Tom Morello you would run all your pedals through the FX loop within your amp. Thankfully with the Power 50 you don’t have to. Simplify your set up with the built-in FX loop feature adding a new twist to your pedal chain effortlessly by accessing the raw signal clipping point that comes before the Presence control and tone-shaping output. By running your pedal chain through the FX loop while keeping the Power 50 engaged you can use your “always on” feature to control the level of all your pedals simply by adjusting the interface on the Power 50 perfect for enhancing your live sound. Specifications Product: MXR TBM1 Tom Morello Power 50 Overdrive Code: MXR-EFX-TBM1 Normal Output Level: -12dBV Maximum Output Level: 0dBV Nominal Send Level: -26dBV Controls: Volume Bass Middle Treble Gain Presence Input Impedance: 700 Kohms Output Impedance: 900 Kohms Return Impedance: 1 Mohms Send Impedance: 10 Kohms Bypass: True Hardwire Current Draw: 12 mA Power Supply: DC 9 volts
Reviews
There are no reviews yet.
Be the first to review “MXR TBM1 Tom Morello Power 50 Overdrive Pedal – New MXR Looper Overdrive Guitar Effect Pedal”
We have one of the largest online selection of new and used MXR music gear. If you are looking for your next pedal, we will have it online at JustPedals with fast delivery direct to you at home. Every item on the JustPedal menu is delivered by sellers to all areas of the USA & UK.
MXR is a renowned manufacturer of guitar effects pedals and audio electronics, recognized for their classic designs and high-quality sound. Established in the 1970s, MXR has played a significant role in shaping the landscape of effects pedals, producing iconic units that have become staples in countless musicians’ rigs. The company’s pedals are celebrated for their rugged construction, intuitive controls, and versatile tones, making them popular among guitarists and bassists across genres.
MXR’s product lineup encompasses a wide range of effects categories, including distortion, delay, modulation, and more. Some of their most notable pedals include the Phase 90 phaser, the Dyna Comp compressor, and the Carbon Copy analog delay, all of which have earned legendary status among players for their distinctive sound and reliability. With a legacy of innovation and a commitment to quality, MXR continues to be a respected name in the world of guitar effects, inspiring musicians to explore new sonic possibilities and express themselves creatively.
Guitar Effect Pedal
A guitar pedal, also known as an effects pedal, is a device used by guitarists to alter the sound of their instrument in various ways. These pedals are typically small, foot-operated units that are connected in a signal chain between the guitar and the amplifier. They can modify the guitar’s tone, pitch, and dynamics by applying different effects such as distortion, reverb, delay, chorus, and more. Guitar pedals come in both analog and digital formats, and they allow musicians to create a wide range of sounds, enhancing their musical expression and creativity. They are essential tools for guitarists in genres ranging from rock and blues to jazz and electronic music.
Looper
A looper pedal is a versatile tool used by guitarists to record and playback musical phrases in real-time. It allows musicians to layer multiple parts, create loops, and build entire arrangements on the fly. Looper pedals come in various configurations and offer different features, but they typically include the following functionalities:
1. **Recording**: A looper pedal enables users to record a musical phrase by pressing a dedicated footswitch. Once the recording is initiated, the pedal captures the incoming audio signal from the guitar or other instrument and loops it back continuously.
2. **Playback**: After recording a loop, the looper pedal plays back the recorded audio continuously in a seamless loop. This allows musicians to accompany themselves or create layered arrangements by adding additional musical parts on top of the original loop.
3. **Overdubbing**: In addition to recording and playing back loops, looper pedals often feature overdubbing functionality, which allows users to layer additional recordings on top of existing loops. Musicians can continuously add new musical parts to the loop, building up complex arrangements in real-time.
4. **Undo/Redo**: Many looper pedals include an undo/redo function, which allows users to remove the last recorded overdub or restore it if needed. This feature provides flexibility and allows for experimentation during live performances or recording sessions.
5. **Stop/Clear**: Looper pedals typically include a stop/clear footswitch that allows users to stop playback and clear the recorded loop from memory. This enables musicians to start fresh with a new recording or transition to a different musical section during a performance.
6. **Loop Length Control**: Some advanced looper pedals offer the ability to control the length of the recorded loop. Users can specify the length of the loop in measures or seconds, allowing for precise control over the timing and structure of the looped arrangement.
7. **Built-in Effects**: Some looper pedals feature built-in effects such as reverse playback, half-speed playback, or pitch shifting, which can add creative possibilities and sonic experimentation to the looping process.
Looper pedals are widely used by guitarists and other musicians for various applications, including live performance, songwriting, practice sessions, and studio recording. They provide a convenient and intuitive way to create, layer, and manipulate musical ideas in real-time, making them an essential tool for creative expression and musical exploration.
New
Just New products for sale, unused, and in their original packaging. They come with a protected seller guarantee and include manufacturer warranties. Read more for additional details.
Overdrive
An overdrive pedal is a type of guitar effects pedal that simulates the sound of a vintage tube amplifier pushed into overdrive or distortion. It adds warmth, richness, and harmonic complexity to the guitar signal, creating a smooth, saturated tone that ranges from mild grit to full-on distortion. Here’s how overdrive pedals work and some common features:
1. **Gain**: The gain control adjusts the amount of overdrive or distortion applied to the guitar signal. Turning up the gain increases the intensity of the overdrive, while lowering it produces a cleaner, more transparent sound.
2. **Level**: The level control adjusts the output volume of the pedal. This allows you to match the volume level of the overdriven signal with your clean signal or boost the overall volume for solos or lead lines.
3. **Tone**: The tone control (sometimes labeled as “tone” or “EQ”) adjusts the frequency response of the overdriven signal. Turning it clockwise boosts the highs and cuts the lows, resulting in a brighter tone. Turning it counterclockwise boosts the lows and cuts the highs, producing a darker tone.
4. **Drive (or Distortion)**: Some overdrive pedals feature a separate drive control, which determines the intensity of the overdrive effect independently of the gain control. This allows for more fine-tuned control over the amount of saturation and distortion in the tone.
5. **True Bypass vs. Buffered Bypass**: Overdrive pedals may have either true bypass or buffered bypass circuits. True bypass preserves the guitar’s original tone when the pedal is turned off, while buffered bypass maintains signal integrity and prevents signal loss when the pedal is engaged.
6. **Voicing Options**: Some overdrive pedals offer voicing options or switchable modes that allow you to tailor the character of the overdrive to suit your playing style or musical genre. This may include options for different clipping diodes, EQ curves, or saturation levels.
7. **Stacking**: Overdrive pedals are often used in combination with other effects pedals, such as boost pedals, distortion pedals, or modulation effects. Stacking multiple overdrive pedals can create unique tonal textures and dynamic range, allowing for greater versatility and customization of your guitar tone.
Overdrive pedals are widely used in various music genres, including blues, rock, country, and jazz. Guitarists use them to add warmth, grit, and character to their tone, whether they’re playing rhythm parts, lead lines, or solos. An overdrive pedal is a staple on many pedalboards, offering classic tones and timeless appeal for guitarists of all levels and styles.
Signature Overdrive Pedal Presence Control Effects Loop International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.
Take off with overdrive, distortion or a combination of both effects in one powerful pedal Dedicated Level, Tone, Drive and Mode controls for awesome sound shaping Status LED for effect on/off and battery check Runs on 9 V battery or the Behringer PSU-SB DC power supply (not included) First-class electronic On/Off switch for highest signal integrity in bypass mode
🎸[2 overdrive modes] Warm: The classic TS overdrive sound replica. Hot: More powerful, a louder, tightened sound. 🎸[Style-type] Combining iconic vintage tube overdrive sound with wide dynamic range, Donner overdrive pedal gives you a wide tonal range from smooth whispers to searing leads. 🎸[Easy to use]Flexible knobs for tone control: LEVEL (output volume), TONE (brightness) and GAIN (overdrive amount). 🎸[True bypass guitar pedal] True bypass provides transparent tone. Enduring aluminum alloy chassis. 🎸[Power supply] DC 9V Adapter power supply.(NOT INCLUDED)
![🎸[2 overdrive modes] Warm: The classic TS overdrive sound replica. Hot: More powerful, a louder, tightened sound. 🎸[Style-type] Combining iconic vintage tube overdrive sound with wide dynamic range, Donner overdrive pedal gives you a wide tonal range...](https://m.media-amazon.com/images/I/41D+0SY95yL._SL313_.jpg)
Reviews
There are no reviews yet.