MOOER ECHOLIZER DELAY PEDAL

Description

here at Just Pedals we love this MOOER ECHOLIZER DELAY PEDAL.

The Mooer Echolizer is an analogue sounding delay circuit with between 25ms and 600ms available to offer anything from slapbacks to medium length delay sounds. The analogue like sound is rich and creamy with the roundness that helps the repeats sit back in the mix without overpowering your playing.

Please note the all Mooer micro series pedals must be powered by 9V DC (not supplied) as they are too small for battery compartments!

Specification

• Very similar to analog delay. Warm, vintage delay sound
• Full metal shell
• Very small and exquisite
• True bypass
• DC 9V Adapter power supply
• Delay Time: 25ms~600ms
• Input: 1/4” monaural jack (impedance: 1M Ohms)
• Output: 1/4” monaural jack (impedance: 470 Ohms)
• Power Requirements: AC adapter 9V DC (center minus plug)
• Current Draw: 40 mA
• Dimensions: 93.5mm (D) × 42mm (W) × 52mm (H)
• Weight:160g
• Accessories: Owner’s Manual

So What kind of Power Supply do I need???
As we’ve said above, the Mooer pedals are too small to fit a 9v battery in, so you need to use these with a compatible 9v power supply. You may already have one for an old pedal, but if you need to buy a new one, you can choose anything from a single 9v supply for about £10, or if you plan on buying a few pedals, then you should look at some of the multi pedal power supplies that we sell – these will work out much cheaper than buying an individual supply for each pedal as well as being much neater as you’ll only need one plug socket for all your pedals! Our full selection of FX pedal power supplies can be viewed here – https://www.andertons.co.uk/power-supplies/cid591/power-supplies.asp#page-1