Description

The KMA Machines Tyler Deluxe Frequency Splitter is in New condition and made by KMA Audio Machines , it is a great Splitter Frequency Deluxe Tyler Machines KMA Guitar Effect Pedal- The KMA Machines Tyler Deluxe Frequency Splitter allows you to split your signal into low and high pass paths hugely expanding functionality and letting you redefine your tone. Want to retain your low end purity while using a fuzz or dirt pedal? Connect your pedal in the high-pass FX-Loop and adjust the cut-off frequency of the High and Low Pass to your needs engage the HP LOOP footswitch and you instantly obtain the best of both worlds. This powerful pedal will instantly become a mainstay on your board thanks to the practically limitless uses and deeper tone accessibility it unlocks. An expanded variant of the popular Tyler this beast has been upgraded in almost every regard. Every component has been carefully replaced to improve the noise floor along with the addition of a clean blend knob and a host of new switches for enhancing tonal adaptability. Modern times bring modern needs so the Tyler Deluxe comes equipped with relay-based soft-switches an internal step-up to increase the headroom for hotter input signals and low-noise op-amps to improve the overall sound quality and usability. A tonal powerhouse this is a pedal that allows you to dive into customizing your tone in a deep way. . Available from Just Pedals for only £ 249 Superior splitting Since the original was also used as an advanced AB/Y box by many it was found that ground loops could occur- never again with the KMA Machines Tyler Deluxe Frequency Splitter! Both SENDs are transformer coupled (with TRIAD Magnetics) to always deliver warm saturation while avoiding ground-loops (internal slide-switched ground-lift). Both loops also have their own phase inversion switch (+/-) to get rid of potential unwanted phase cancelation. The master phase-switch ensures consistently reliable interaction with your set filter frequency at all times no matter if you either have a loop engaged or not. Finally the LP-CUT and HP-CUT switches will now mute your loops when bypassed which helps tidy up performances. Features Two-Channel Signal Splitter – Variable 12 dB/oct. Low/High-Pass Fully-Isolated and Transformer-based FX Loop Sends Variable Clean Blend and Mix controls – for the perfect blend of highs and lows Loop-dedicated and main Phase-Inverters Relay-based soft-switching Separate Buffered FX-Loops for each filter Active Level Control – up to 12 dB boost Made in Berlin Germany Powered by 9 V PSU (9 V DC centre – 2.1 mm 100 mA max. current draw)Specifications Product code: KMA-TYLER-DELUXE Dimensions: 6.0 (H) x 12.1 (W) x 14.6 (D) cm Weight: 0.52 kg